Putty Into Cisco Router (Diginet Connection)
In order to putty into a Diginet router (Cisco) you need to open three Putty Sessions.
1st Session
Step1: Log into Vibe Headend - vibe6.euphoria.co.za port 22
Step 2: Navigate to tunnels and add 8081 followed by 10.0.3.238:80 and 22 in the forwarded ports section.
2nd Session
Step 1: Log into primary connection - 127.0.0.1 8082
Step 2: Navigate to tunnels and add 8083 followed by Diginet router (Cisco) IP (in this case it is 192.168.0.1) port 23 in the forwarded ports section.
3rd Session
Step 1: Log into primary connection - 127.0.0.1 8083
Telnet
The overall result should look like this:
Related Articles
Troubleshooting: Issues with an Asterisk Installation with SIP Trunk behind a Sonicwall TZ100 Router.
The problem usually is the one-way communication router through one trunk or another related issue.To solve the issue there are the general rules: 1. Set the UDP timeout to 90 sec or more. 2. Do not use SIP transformations (Voip section) and modify ...Troubleshooting: Calls Dropping using a Mikrotik OS. (Router)
We have seen a SIP helper cause occasional dropped calls when using a Mikrotik Router without ViBE. Go to Firewall Settings. Go to Service Ports. Ensure sip on port 5060 and 5061 option is disabled. When you mouse rolls over it, it will give you the ...Troubleshooting Guide
Introduction This guide has been created to help with the troubleshooting process and to ensure the most common issues/checks have been addressed. Troubleshooting - Phones/Vibe/Networking Checklist for Phones Is the phone connected to the correct ...Troubleshooting: Vibe router not up, But showing that its up. Phones are showing no service through vibe but not when you bypass it.
The head end might have cached information and when we remove the head end info and apply settings then re-add the info the link comes up.Troubleshooting: Downloads and Tool issues in TMS
Euphoria Advanced Softphone How to Authenticate the Euphoria Advanced Softphone or Agent Manager. The Euphoria Agent Manager/Softphone app makes use of the tms.euphoria.co.za and api.euphoria.co.za to authenticate. These destinations should be ...