We have seen a SIP helper cause occasional dropped calls when using a Mikrotik Router without ViBE. 1. Go to Firewall Settings 2. Go to Service Ports 3. Ensure sip on port 5060 and 5061 option is disabled. 4. When you mouse rolls over it, it will ...
1. If it shows the Mac address, either the Vibe CPE is not connected correctly to the network, or the Firewall is blocking the VPN from exiting the network 2. If it shows the IP address, Packets are being sent to the VIBE server but are not able to ...
I acknowledge that it will remain my responsibility to cancel my lines/contract with my current service provider should porting not end in an automatic cancellation 30 days after porting. For a customer porting a PRI/BRI, we need the following (in ...
The Vibe Headend Server maps the public WAN IP of the link /connection to the Mac address of the CPE. Hence if you put two vibe routers on the same wan link, the head end server will be using the first link to connect and map the incoming IP to the ...
The NPC (Number Portability Company) states that once a number has been ported, there is a three-month “freeze” period on porting those numbers again; you will therefore not be able to port to a new service provider during this time; however, a port ...