Setup of a Gigaset Phone

Setup of a Gigaset Phone

Register an extension to a Gigaset device via the Web Interface of the Gigaset IP Phone.

  1. Log into the handset - Openithe Gigaset Browser and insert the IP Address. (By default, the phone is set on DHCP, to get the IP address, you would need to press the button on the base station once, and it should page/ring the phone with the IP address. The pin by default should be “0000“)
  2. Navigate to “Settings”.
  3. Get the SIP Credentials
  4. Set the SIP credentials.
    1. Click on the telephony option.
    2. Click on the registrations/extensions section. 
    3. Navigate to the SIP details, then to “IP1“, and click on the edit button.
    4. Enter the SIP credentials.
  5. Click on the “Show advanced settings” button.
  6. Fill in the necessary fields (What are these fields?)
  7. Save all information by clicking “Set” at the bottom.
  8. Set the audio codec. (Selected the G729 audio codec.)
    1. Click on “Audio” and show “advanced settings”.
    2. Set any other extensions with the same Audio codec.
    3. Click on “Set” to save the changes.
  9. Setup the mailbox.
    1. Click “Network Mailboxes” and fill in the fields
  10. If network changes need to be made (static or DHCP), do so by clicking on Network, then IP configuration.

    • Related Articles

    • Setup of a Fanvil Phone

      Connect the Fanvil device to the network (modem/router/switch/network point) using an Ethernet cable (ensure the PC is connected to the same network as the Fanvil device) Locate the IP address OnFanvil X3SP Press the "OK" button on Fanvil X3SP or ...

    • Setup Agent Login for the Yealink Phone.

      Log into the Yealink account by inserting the IP address in a web browser. Note: To log into the device, the user will need the IP address (Refer to the devices configuration manual.) Set up the Dsskeys. Ensure the log on/off buttons (Label) are ...

    • Setting up a SNOM Phone

      Connect the SNOM to the network and let it get an IP Address. Log on to the device’s web interface. Click on the Identity 1 option on the left under the Setup category. The page will open on the “ Login” tab; fill in the SIP credentials. This will ...

    • Setting up a Yealink Phone

      Registering extensions to a Yealink device is done via the Web Interface of the Yealink IP Phone. Log on to the handset by opening a new tab in your Web Browser and inserting the phone’s IP Address into the Address bar. ( Press the OK button to get ...

    • Phone JS API (For Basic Extensions) - Beta

      Overview The PhoneJS API interacts directly with the Euphoria browser phone and allows you to use the Euphoria browser phone outside of the Euphoria platform. Usage Requirements Library Key is required to use this API. Please contact us in case you ...