Setup of a Fanvil Phone

Setup of a Fanvil Phone

  1. Connect the Fanvil device to the network (modem/router/switch/network point) using an Ethernet cable (ensure the PC is connected to the same network as the Fanvil device)
  2. Locate the IP address 
    1. OnFanvil X3SP
      • Press the "OK" button on Fanvil X3SP or
      • Press the soft menu button "i" or
      • Long-pressing button "2" on the Fanvil X3P. 
    2. On Fanvil X1P
      • Press "Menu">> "Status" or the "Down" navigation key.
  3. Launch the web browser and type the IP address into the URL bar.
  4. Log in to the device using the following details :
    • Username: admin      
    • Password: admin
  5. On the dashboard, click on “Line”. Select the line to set the extension up on.
  6. Fill in the following fields
    • Server Address: PBX SIP Server
    • Server Port: 5060
    • Authentication User: SIP Username
    • Authentication Password: SIP Password
    • Username: SIP Username
    • Display User: SIP Username
    • Realm: PBX SIP Server
  7. Activate the account by clicking on the Activate tick box.
    Once all fields are updated and settings applied, the extension will register and show online on the Realtime monitor in the TMS.
  8. Set the Audio codec to G729AB: 
    • In the “Line” section, expand the Codecs Settings category
    • Only keep the G729AB codec in the Enabled section and move all other codecs to the Disabled section by clicking on the arrows.
  9. Add the Time and Date – Click on Phone settings, then select the Time/date tab to ensure daylight savings is disabled.
     Note: only set this up if a static IP address is needed for the device. With a DHCP, this step can be skipped as the phone should be registered.

    • Related Articles

    • Setup of a Gigaset Phone

      Register an extension to a Gigaset device via the Web Interface of the Gigaset IP Phone. Log into the handset - Openithe Gigaset Browser and insert the IP Address. (By default, the phone is set on DHCP, to get the IP address, you would need to press ...

    • Setup Agent Login for the Yealink Phone.

      Log into the Yealink account by inserting the IP address in a web browser. Note: To log into the device, the user will need the IP address (Refer to the devices configuration manual.) Set up the Dsskeys. Ensure the log on/off buttons (Label) are ...

    • Setting up a SNOM Phone

      Connect the SNOM to the network and let it get an IP Address. Log on to the device’s web interface. Click on the Identity 1 option on the left under the Setup category. The page will open on the “ Login” tab; fill in the SIP credentials. This will ...

    • Setting up a Yealink Phone

      Registering extensions to a Yealink device is done via the Web Interface of the Yealink IP Phone. Log on to the handset by opening a new tab in your Web Browser and inserting the phone’s IP Address into the Address bar. ( Press the OK button to get ...

    • Phone JS API (For Basic Extensions) - Beta

      Overview The PhoneJS API interacts directly with the Euphoria browser phone and allows you to use the Euphoria browser phone outside of the Euphoria platform. Usage Requirements Library Key is required to use this API. Please contact us in case you ...