Setup Agent Login for the Yealink Phone.

Setup Agent Login for the Yealink Phone.

  1. Log into the Yealink account by inserting the IP address in a web browser.
    Note: To log into the device, the user will need the IP address (Refer to the devices configuration manual.)
  2. Set up the Dsskeys.
  3. Ensure the log on/off buttons (Label) are configured on the phone.
  4. Log in to the TMS to get the Agent code and pin.
    1. Click on the Extension Manager menu item.
    2. Click on the Extension submenu.
    3. Select the extension that you want to change.
    4. Click on the Details tab at the top.
    5. Scroll down to “Provision settings“.
      Note: The code and pin needed will display; click save before proceeding.
  5. Log in to the phone and add in the pin and code. 
    Note: To get to the dot; please press the * button twice (XXXX {.} XX)
  6. Once the details are entered, the extension will be logged in.

    • Related Articles

    • Setup of a Gigaset Phone

      Register an extension to a Gigaset device via the Web Interface of the Gigaset IP Phone. Log into the handset - Openithe Gigaset Browser and insert the IP Address. (By default, the phone is set on DHCP, to get the IP address, you would need to press ...

    • Setting up a Yealink Phone

      Registering extensions to a Yealink device is done via the Web Interface of the Yealink IP Phone. Log on to the handset by opening a new tab in your Web Browser and inserting the phone’s IP Address into the Address bar. ( Press the OK button to get ...

    • Setup of a Fanvil Phone

      Connect the Fanvil device to the network (modem/router/switch/network point) using an Ethernet cable (ensure the PC is connected to the same network as the Fanvil device) Locate the IP address OnFanvil X3SP Press the "OK" button on Fanvil X3SP or ...

    • How to enable RTP encryption on Yealink.

      Enable it on the extension in the matrix. (Please ask Euphoria Support to do this) Log into the Yealink account by inserting the IP address in a web browser. Note: To log into the device, the user will need the IP address (refer to the devices ...

    • Setting up a SNOM Phone

      Connect the SNOM to the network and let it get an IP Address. Log on to the device’s web interface. Click on the Identity 1 option on the left under the Setup category. The page will open on the “ Login” tab; fill in the SIP credentials. This will ...