Setting up a Yealink Phone

Setting up a Yealink Phone

Registering extensions to a Yealink device is done via the Web Interface of the Yealink IP Phone.

  1. Log on to the handset by opening a new tab in your Web Browser and inserting the phone’s IP Address into the Address bar. ( Press the OK button to get the IP address.)

  2. Go to “Account”, this is where we enter the extension’s details.

  3. Get the Sip Credentials (Log on to TMs for these.)

  4. Log on to the Yealink account by inserting the IP address in a web browser.

Note: To log on to the device, the user will need the IP address. (Refer to the device's configuration manual.)

  1. Click on the “Account” tab and fill in the information. 

  2. Click on “Apply”, the extension should say registered.

  3. Enable the correct audio codecs. ( Euphoria uses the G729 Codec.)

    1. Remove unnecessary Codecs by holding the “Shift” key on the keyboard and select all unwanted Codecs. Click on the arrow facing towards the “Disabled codecs” block. Click “Confirm”. 

  4. Ensure Time& Date settings are correct.Euphoria has its own time servers, ntp1.euphoria.co.za and ntp.euphoria.co.za.

    1. Insert ntp1.euphoria.co.za.

    2. If a secondary NTP Server is required, insert NTP.euphoria.co.za.

    3. Choose the desired time zone (+2 Greece, Israel, Turkey etc. )

    4. Disable “Daylight Saving Time”.

    5. Save the changes and click “Confirm.

    • Related Articles

    • Setup Agent Login for the Yealink Phone.

      Log into the Yealink account by inserting the IP address in a web browser. Note: To log into the device, the user will need the IP address (Refer to the devices configuration manual.) Set up the Dsskeys. Ensure the log on/off buttons (Label) are ...

    • How to enable RTP encryption on Yealink.

      Enable it on the extension in the matrix. (Please ask Euphoria Support to do this) Log into the Yealink account by inserting the IP address in a web browser. Note: To log into the device, the user will need the IP address (refer to the devices ...

    • Setting up a SNOM Phone

      Connect the SNOM to the network and let it get an IP Address. Log on to the device’s web interface. Click on the Identity 1 option on the left under the Setup category. The page will open on the “ Login” tab; fill in the SIP credentials. This will ...

    • How to Set up a new cordless phone

      Registering extensions to a Yealink device is done via the Web Interface of the Yealink IP Phone. Log into the handset by opening a new tab in your Web Browser and inserting the phone’s IP Address into the Address bar. ( Press the OK button to get ...

    • Setup of a Gigaset Phone

      Register an extension to a Gigaset device via the Web Interface of the Gigaset IP Phone. Log into the handset - Openithe Gigaset Browser and insert the IP Address. (By default, the phone is set on DHCP, to get the IP address, you would need to press ...